PE60_2

Line array readout electronics

The powerful PE60_2 line array readout electronics for line and image sensors is especially suited for high speed, process control and multichannel applications. Its generously dimensioned components enable the control of extensive periphery, complex internal calculations and tailored sensor readout.

Supported sensors
  • S837x, S11639, S13496, … (CMOS)
  • S838x, … (NMOS)
  • G13913 (InGaAs mini)
  • G11620, G92xx, … (uncooled InGaAs)
  • G1147x, G11620, G92xx, … (cooled InGaAs)
  • S10140, S10420, S11071, S1115x, S7030, … (BTCCD)
  • S10141, S11511, S11850, S1325x, S7031, … (cooled BTCCD)
  • Others on request

PE60_2 for cooled BTCCD Sensor S11850, top
PE60_2 for cooled BTCCD Sensor S11850, top
PE60_2 for cooled BTCCD Sensor S11850, side
PE60_2 for cooled BTCCD Sensor S11850, side
PE60_2 for cooled BTCCD Sensor S11850, bottom
PE60_2 for cooled BTCCD Sensor S11850, bottom
PE60_2 for CMOS Sensor S11639
PE60_2 for CMOS Sensor S11639
PE60_2 for cooled InGaAs Sensor G1147x with TEC-Control
PE60_2 for cooled InGaAs Sensor G1147x with TEC-Control

Electrical parameters                                 
  • 32 bit, 252 MHz RISC Processor
  • Power Supply via USB or 5 V external
  • Analog-Digital-Conversion: 16 bit, up to 10 MS/s* with programmable gain and offset                                                                        
  • JETI Universal Sensor Connector via 16-pin flat-ribbon-cable
  • Fast and low jitter trigger input and output, TTL compatible
  • Shutter/Lamp control output, firmware configurable
  • Flashlamp control with programmable length and interval timing
  • Stabilized 5 V Output
  • 8 GPIO-Pins, 3 Analog Inputs (12 Bit, 18 MS/s)*

 

Communication interfaces
  • USB-HighSpeed (480 Mbit/s, virtual COM Port)*
  • LV-TTL UART (25 MBaud, 8N1)*
  • SPI (50 Mbit/s, Master/Slave) *
  • 10/100 Ethernet LAN onboard (optional)

Mechanical dimensions
  • 70 x 70 x 20 mm³

 

*maximum theoretical speed, practical values are application specific
Firmware
  • Continuous, 2D-Image and vertical multichannel measurement modes
  • Dark counts, reference counts, transmission, absorbance, (pixelwise or in wavelength steps with pixel wavelength fit up to 4th order)
  • Readout configuration: Averaging, Oversampling, Offset, Gain, Pixelrange, Pixelbinning
  • SCPI like Control Syntax, similar on all JETI electronics
  • Windows DLLs

 

 

 

 

TEC-add-on-Board
  • High Power TEC driver up to 10 V, 3.5 A and <10 mK accuracy
  • Regulation Parameters programmable via PC-Software

 

Documents
Documentation

iconPDFLeaflet Readout electronics
Datasheet
 iconPDFPE60_2.pdf 
Hardware description
 iconPDFPE60_2 Hardware Description.pdf

 

Software, Drivers and Firmware
Software JETI VersaSpec
  • Demo version
    • JETI offers you a demo version of JETI VersaSpec for testing. With the demo version you can get a first insight into the software.
      • iconZIP JETI VersaSpec DEMO VERSION (GRÖße)
  • Full version
    • To download the full version of the software you have to be logged in (see in menu "Login").
    • Actual software version: V5.9.72
    • Download size: GRÖßE MiB

      JETI VersaSpec Changelog
Software JETI SDK
  • iconZIP JETI SDK V4.6.8 (4.9 MiB)
  • Actual software version: V4.6.8

     JETI SDK Changelog
Firmware
  • Actual firmware version:
  • Please contact us for the latest firmware version.
Drivers

 iconZIP jeti_cdc_driver.zip
Please note, these drivers are only necessary for Windows 7/8/8.1
Firmware commands

iconPDFOperating Instructions Firmware SPECFIRM.pdf

  

pe60 2 blockdiagramm
Block diagram PE60_2